1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. WELCOME Grumblers
    Backup is now done at 3PM EDT. You may find the server down for up to two minutes at that time.

WTB: Morso 2nd stop & rule

Discussion in 'Commercial Posts, For Sale of Framing Shop Stuff a' started by Splitstop, Jan 29, 2017.

  1. Splitstop

    Splitstop Grumbler

    As title please I'm new to frameing and the forum so please be patient

    I won a Morso off eBay and dident know what I was buying to be honest bought it off a lady who claimed she had never used it seems to cut nice from what I have tried

    I've found the ruler is missing the part that fits the clamp if that makes sence?? and would also like a 2nd stop please kind regards and thanks in advance Nick

    For some reason it won't let me upload photos I don't know why
    W.D. Quinn Saw Co.
  2. Keith L Hewitt

    Keith L Hewitt SGF, Supreme Grumble Framer

    Nick, You have not disclosed you are UK based, so people here will just assume you are in the USA
    This is mainly a USA / Canada forum.
    May I suggest that as you are based in UK, probably a lot better to keep this sort of question on The Framers Forum.
    There are plenty of people on there who will help you find the parts that are missing.
  3. Splitstop

    Splitstop Grumbler

    Many thanks I didn't know this USA thank you for the heads up

    Some one off there pointed me over here thank you for the advice

    I've been a member on there a couple of weeks and to be honest I don't seem to get replys on that forum but will keep trying cheers
  4. IFGL

    IFGL SGF, Supreme Grumble Framer

    You are unlikely to find a second hand version of what you need, anyone with a morso will need the part, if they are selling the machine it will go with it, they don't often break to the point of selling the bits off, Lion should be able to help you.
    As for not getting replys off of the FF most of the people who would have answered you have been banned for various reasons, leaving others not really wanting to post, David suggested you post here about your Fletcher cutter as they are more popular this side of the pond than in the UK, most of us there have the Keencut version.
    I am UK based and will help you if I can,
  5. Splitstop

    Splitstop Grumbler

    God bless you and thank you for your help and advice
    I looked up lion I've got there Number just under £100 if they will allow me to collect I will go tomorrow they are only half hour from me so fantastic thank you again IFGL
  6. Al B

    Al B CGF, Certified Grumble Framer

    Splistop - I was looking around on here and I found some old posts. I researched and there is a company in Little Rock, Arkansas - if you don't have any luck over there. It is TechMark - you can email them at info@tech-mark.com. I hope you have luck over there. Don't be afraid to ask us!

  7. Splitstop

    Splitstop Grumbler

    God bless you Al thank you also ;)
    Al B likes this.
  8. Splitstop

    Splitstop Grumbler

    All sorted I've got the 2nd and miter ruler from lion can collect in 2 hours fantastic & thank you all was £178 total fingers crossed my machine will be fit for use & can start learning now
    Again thank you all for taking the time to advise help & guide me Nick
    Al B likes this.
  9. graysalchemy

    graysalchemy CGF II, Certified Grumble Framer Level 2

    Glad you got sorted Nick. Were abouts are you based?
  10. Splitstop

    Splitstop Grumbler

    God bless you all again I will amend my account soon as I can thank you you all again
    I'm in Stourbridge West Midlands about 12 miles from Birmingham known as the black country if you know the area
    Just got home from Lion what a fantastic place & local as well they gave me a couple of catalogs and a discount as I collected so well pleased I now have a complete Morso that appears to be cutting nice the ruler with angel was missing they sorted me one of them and the 2nd stop

    Time to start practising wish me luck thank you all again for your kindness & help and guidance most appreciated
  11. Bob Doyle

    Bob Doyle SPFG, Supreme Picture Framing God

    Talk to lion about sharpening the blades. Odds are good that they need to be sharpened, in fact if they don't need sharpening I would be shocked.

    The morso chopper is a workhorse you should never need to replace anything but will constantly want to sharpen those blades. Check back here for help and tips on both the 3100 and the morso. You will be learning words like compo crushing and chipout in no time!
    neilframer, tedh and IFGL like this.
  12. graysalchemy

    graysalchemy CGF II, Certified Grumble Framer Level 2

    Lion I think have a genuine morso blade sharpening machine as do mainline in Nottingham, but i would say that lion was your best bet being so local.
  13. Splitstop

    Splitstop Grumbler

    Thank you Sir
    I've found this forum the best of them all to honest

    I shall get them sharpened next week then cheers for the info
    Al B likes this.
W.D. Quinn Saw Co.

Share This Page

Sponsor Wanted